Tips

เปิด  Ports ที่เราต้องการใช้งานในระบบปฏิบัติการ FreeBSD

ตัวอย่าง  ต้องการเปิดใช้งาน  Ports  8443  ใช้คำสั่งดังนี้

# ipfw add 250 allow tcp from any to any dst-port 8443

หรือ

# ipfw add 250 allow udp from any to any dst-port 8443

 

---

#/etc/rc.conf

firewall_enable="YES"
firewall_type="OPEN"
firewall_script="/etc/ipfw.rules"
firewall_quite="YES"
firewall_logging="YES"

++++++++++++++++++

#/etc/ipfw.rules
cmd="ipfw -q add"
ipfw -q -f flush
$cmd 05 allow all from any to any via lo0
$cmd 10 deny all from any to 127.0.0.0/8
$cmd 15 deny all from 127.0.0.0/8 to any
$cmd 20 deny tcp from any to any frag
$cmd 25 check-state
$cmd 30 allow tcp from any to any established
$cmd 35 allow all from any to any out keep-state
$cmd 40 allow icmp from any to any
$cmd 45 allow udp from any to any 21 in keep-state
$cmd 46 allow tcp from any to any 21 in setup keep-state
$cmd 50 allow tcp from any to any 22 in setup keep-state
$cmd 55 allow tcp from any to any 25 in setup keep-state
$cmd 60 allow udp from any to any 53 in keep-state
$cmd 61 allow tcp from any to any 53 in setup keep-state
$cmd 65 allow tcp from any to any 80 in setup keep-state
$cmd 70 allow tcp from any to any 443 in setup keep-state
$cmd 75 allow tcp from any to any 110 in setup keep-state
$cmd 80 allow tcp from any to any 143 in setup keep-state
$cmd 85 allow tcp from any to any 8080 in setup keep-state
$cmd 500 pass all from any to me limit src-addr 2
$cmd 999 deny log all from any to any

 

---

ตั้งค่า Apache22 ให้เรียกเว็บ user โดยไม่ต้องพิมพ์ตัวหนอน ~

แก้ไข httpd.conf ดังนี้

# pico /usr/local/etc/apache22/httpd.conf

กด Ctrl + w พิมพ์ DocumentRoot
เปลี่ยนเป็น

DocumentRoot "/home/"

ไปที่กลุ่มบรรทัด

<Directory />
AllowOverride None
Order deny,allow
Deny from all
</Directory>

แล้วเปลี่ยนใหม่เป็น

<Directory />
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

แทรกคำสั่ง

<Directory "/home/">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

บันทึกไฟล์และออก

# /usr/local/sbin/apachectl restart

 

---

 

The following rules go into /etc/ipfw.rules.

################ Start of IPFW rules file ###############################
# Flush out the list before we begin.
ipfw -q -f flush

# Set rules command prefix
cmd="ipfw -q add"
pif="dc0"     # public interface name of NIC
              # facing the public Internet

#################################################################
# No restrictions on Inside LAN Interface for private network
# Not needed unless you have LAN.
# Change xl0 to your LAN NIC interface name
#################################################################
#$cmd 00005 allow all from any to any via xl0

#################################################################
# No restrictions on Loopback Interface
#################################################################
$cmd 00010 allow all from any to any via lo0

#################################################################
# Allow the packet through if it has previous been added to the
# the "dynamic" rules table by a allow keep-state statement.
#################################################################
$cmd 00015 check-state

#################################################################
# Interface facing Public Internet (Outbound Section)
# Interrogate session start requests originating from behind the
# firewall on the private network or from this gateway server
# destine for the public Internet.
#################################################################

# Allow out access to my ISP's Domain name server.
# x.x.x.x must be the IP address of your ISP.s DNS
# Dup these lines if your ISP has more than one DNS server
# Get the IP addresses from /etc/resolv.conf file
$cmd 00110 allow tcp from any to x.x.x.x 53 out via $pif setup keep-state
$cmd 00111 allow udp from any to x.x.x.x 53 out via $pif keep-state

# Allow out access to my ISP's DHCP server for cable/DSL configurations.
# This rule is not needed for .user ppp. connection to the public Internet.
# so you can delete this whole group.
# Use the following rule and check log for IP address.
# Then put IP address in commented out rule & delete first rule
$cmd 00120 allow log udp from any to any 67 out via $pif keep-state
#$cmd 00120 allow udp from any to x.x.x.x 67 out via $pif keep-state

# Allow out non-secure standard www function
$cmd 00200 allow tcp from any to any 80 out via $pif setup keep-state

# Allow out secure www function https over TLS SSL
$cmd 00220 allow tcp from any to any 443 out via $pif setup keep-state

# Allow out send & get email function
$cmd 00230 allow tcp from any to any 25 out via $pif setup keep-state
$cmd 00231 allow tcp from any to any 110 out via $pif setup keep-state

# Allow out FBSD (make install & CVSUP) functions
# Basically give user root "GOD" privileges.
$cmd 00240 allow tcp from me to any out via $pif setup keep-state uid root

# Allow out ping
$cmd 00250 allow icmp from any to any out via $pif keep-state

# Allow out Time
$cmd 00260 allow tcp from any to any 37 out via $pif setup keep-state

# Allow out nntp news (i.e. news groups)
$cmd 00270 allow tcp from any to any 119 out via $pif setup keep-state

# Allow out secure FTP, Telnet, and SCP
# This function is using SSH (secure shell)
$cmd 00280 allow tcp from any to any 22 out via $pif setup keep-state

# Allow out whois
$cmd 00290 allow tcp from any to any 43 out via $pif setup keep-state

# deny and log everything else that.s trying to get out.
# This rule enforces the block all by default logic.
$cmd 00299 deny log all from any to any out via $pif

#################################################################
# Interface facing Public Internet (Inbound Section)
# Check packets originating from the public Internet
# destined for this gateway server or the private network.
#################################################################

# Deny all inbound traffic from non-routable reserved address spaces
$cmd 00300 deny all from 192.168.0.0/16 to any in via $pif  #RFC 1918 private IP
$cmd 00301 deny all from 172.16.0.0/12 to any in via $pif     #RFC 1918 private IP
$cmd 00302 deny all from 10.0.0.0/8 to any in via $pif          #RFC 1918 private IP
$cmd 00303 deny all from 127.0.0.0/8 to any in via $pif        #loopback
$cmd 00304 deny all from 0.0.0.0/8 to any in via $pif            #loopback
$cmd 00305 deny all from 169.254.0.0/16 to any in via $pif   #DHCP auto-config
$cmd 00306 deny all from 192.0.2.0/24 to any in via $pif       #reserved for docs
$cmd 00307 deny all from 204.152.64.0/23 to any in via $pif  #Sun cluster interconnect
$cmd 00308 deny all from 224.0.0.0/3 to any in via $pif         #Class D & E multicast

# Deny public pings
$cmd 00310 deny icmp from any to any in via $pif

# Deny ident
$cmd 00315 deny tcp from any to any 113 in via $pif

# Deny all Netbios service. 137=name, 138=datagram, 139=session
# Netbios is MS/Windows sharing services.
# Block MS/Windows hosts2 name server requests 81
$cmd 00320 deny tcp from any to any 137 in via $pif
$cmd 00321 deny tcp from any to any 138 in via $pif
$cmd 00322 deny tcp from any to any 139 in via $pif
$cmd 00323 deny tcp from any to any 81 in via $pif

# Deny any late arriving packets
$cmd 00330 deny all from any to any frag in via $pif

# Deny ACK packets that did not match the dynamic rule table
$cmd 00332 deny tcp from any to any established in via $pif

# Allow traffic in from ISP's DHCP server. This rule must contain
# the IP address of your ISP.s DHCP server as it.s the only
# authorized source to send this packet type.
# Only necessary for cable or DSL configurations.
# This rule is not needed for .user ppp. type connection to
# the public Internet. This is the same IP address you captured
# and used in the outbound section.
#$cmd 00360 allow udp from any to x.x.x.x 67 in via $pif keep-state

# Allow in standard www function because I have apache server
$cmd 00400 allow tcp from any to me 80 in via $pif setup limit src-addr 2

# Allow in secure FTP, Telnet, and SCP from public Internet
$cmd 00410 allow tcp from any to me 22 in via $pif setup limit src-addr 2

# Allow in non-secure Telnet session from public Internet
# labeled non-secure because ID & PW are passed over public
# Internet as clear text.
# Delete this sample group if you do not have telnet server enabled.
$cmd 00420 allow tcp from any to me 23 in via $pif setup limit src-addr 2

# Reject & Log all incoming connections from the outside
$cmd 00499 deny log all from any to any in via $pif

# Everything else is denied by default
# deny and log all packets that fell through to see what they are
$cmd 00999 deny log all from any to any
################ End of IPFW rules file ###############################

ลอง netstat -an |grep LIST ดูนะครับว่ามี listen port ไหนอยู่บ้าง

netstat -na|grep tcp      ดูเครื่องตัวเองว่าเปิด port อะไรไว้

sockstat -4

 

---

 

ปัญหาภาษาไทยกับ กับ Mysql

http://gotoknow.org/blog/patrickz/18859

 

---

 

 : แปลง time stamp ใน access.log ของ squid โดยใช้ logformat

http://www.hadyaiinternet.com/index.php?topic=254.0

---

บทความ FreeBSD

http://kom.homelinux.org/node/4

---